Skip to main content

Safety Measures for Woodworkers

 

Woodworking is the general term used to refer to the skill of making various items out of wood. Crafting furniture, cabinetry, wood carving, and the likes are all types of woodworking. As such, it’s safe to assume that woodworkers use different tools, power tools, even to create their masterpieces.

If you’re a newbie woodworker, some of the basic tools you would need to get started include a workbench, clamps, chisels, mallets, power drill, power jointer, planer, hand saw, hammer, and screwdrivers, to name a few. You can check out https://thebestpowertoolz.com/5-best-electric-hand-planers/ for the best hand planer to buy, seeing as how it’s one of the most important tools in woodworking.

Obviously, since you’ll be handling power tools in your woodworking activities, there are some safety measures you need to observe lest you want to end up with one (or two) less appendage. Check out these tips:

  • Always wear protective gear when working in the woodworking shop and most especially when operating machines and power tools. Some protective gears include goggles or safety glasses, dust masks, gloves, protective footwear, and protection for the ears when excessive noise is generated by a machine.
  • Make sure that all safety devices or guards are checked, adjusted and turned off before starting and after using the machines. Ensure that the machine is grounded before switching it on. The machines must be switched off and unplugged before making any inspecting, cleaning, changing blades or making any repairs on the machine.
  • Keep the stop and start switches within easy reach of the machine operator. Start switches must be protected to avoid accidental pushing and starting of the machine.
  • Keep the blades and other cutting tools sharp, honed, clean and in good condition to prevent forcing the blades.
  • Maintain a clutter-free and well-lit workshop. Install exhaust systems that collect sawdust and wood chips. Keep the work area of the shop well lighted. Position the machines in such a way that the light will be focused on the machine but will not glare the operator.
  • Level the floor areas and install a flooring that is non-slip to prevent accidental trips, slips, falls and stumbling. Keep the floor free from electric cords that can cause tripping of workers.
  • Use push stick or jigs when cutting instead of your hands. Clamp down wood pieces when doing work to keep these firmly on the work surface. Make sure that wood stock is free from nails before doing any work on it.
  • Arrange the machinery in a way where all the large equipment pieces can be operated comfortably and still leaving out enough floor space for other activities within the shop without workers bumping into each other.
  • Build tables with extensions that have supports on both sides to accommodate large pieces of wood.

Most of these safety precautions need nothing more than common sense, which every person using woodworking machinery knows but ignore at times. Surely, all woodworkers know that wearing loose clothing, neckties, and jewelry are risky or that horseplay is a big no-no in the woodwork shop. Still, experienced and newbie woodworkers do well to heed these pieces of advice to be on the safe side.